PR electronics’ temperature transmitters cover every application within transmission of RTD and TC sensor signals into mA, mV, HART®, PROFIBUS® PA and FOUNDATION™ Fieldbus communication. The product range includes:

• PRetrans 5100
• PRetop 5300
• PRetrans 6300
• The 2200 series

PRetrans 5100, PRetop 5300 and PRetrans 6300

• The unique AUTOSWITC function, which automatically recognises the protocol to which the transmitter is connected, allows these temperature transmitters to be integrated in both PROFIBUS® PA and FOUNDATION™ Fieldbus systems.
• The digital communication permits the user to carry out differential, redundancy and average measurements, PID regulation, diagnostics, etc.
• The integrated calibration function allows setup of sensor error detection.
• The transmitters are available for both standard and I.S. applications.
• The transmitters are most flexible and configurable through PR electronics’ own PC program, PReset, or the common bus systems dependant on transmitter type.

PRetop 5350 and PRetrans 6350 

• Bus transmitters compatible with the PROFIBUS® PA and FOUNDATION™ Fieldbus protocols.
• Level transmitters for Ohmic level sensors with potentiometers up to 100 kOhm with the standardised bus protocols PROFIBUS® PA and FOUNDATION™ Fieldbus as output.
• LAS function and PID are both integrated in the FOUNDATION™ Fieldbus transmitter. 
• PRetop 5350 and PRetrans 6350 are available as standard or I.S. versions. 
• PRetop can be mounted in DIN form B sensor head and thus suitable for direct mounting at the measurement area.
• The PRetrans 6350 is for DIN rail mounting and is thus appropriate for mounting in control room.

The 2200 series

A number of low-priced temperature transmitters each covering a specific application make up the 2200 series. Some transmitters are configured from factory; others can be programmed wholly or partly through DIP-switches or front/display.

Order brochures