You have no products on your list...
When browsing product pages on this website, you have the possibility to add products to a list - and send your list to us, thereby requesting a quotation.
You add products to the list by clicking the "GET A QUOTE" button on the individual product pages.
When you have submitted the list, we will get back to you as quickly as possible.
If you don't submit the list, it will be visible to you on the website for 7 days (we will place a so-called' cookie on your pc or tablet).
We hope you will find the functionality useful. Go to the product pages to add products to your list.
5202A
Pulse isolator
- 2 channels - 2 or 4 outputs
- Dual output
- 5-port 3.75 kVAC galvanic isolation
- Cable error detection
- Universal supply by AC or DC
Application
- Pulse isolator for the supply of NAMUR sensors.
- Pulse isolator for the detection of mechanical contacts.
- One input signal can be used on two separate outputs.
- A cable error alarm can be detected on a separate output.
Technical characteristics
- PR5202A1 and 5202A2 have relays with change-over contacts or open NPN collectors.
- PR5202A4 has 4 SPST relays, which are activated simultaneously two and two. Each relay can be programmed to the function N.O. or N.C.
- Inputs, outputs and supply are floating and galvanically separated.
- 5202 is designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations.
Mounting / installation
- Mounted vertically or horizontally on a DIN rail. Up to 84 channels per meter can be mounted.
Safety note
Russian manual
UL certificate
FMEDA report
EAC declaration
EAC LVD declaration
Metrology Pattern Approval (MPA)
Environmental Conditions
| Operating temperature | -20°C to +60°C |
| Calibration temperature | 20...28°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree | IP20 |
Mechanical specifications
| Dimensions (HxWxD) | 109 x 23.5 x 130 mm |
| Weight approx. | 230 g |
| Wire size | 1 x 2.5 mm2 stranded wire |
| Screw terminal torque | 0.5 Nm |
Common specifications
Supply |
|
| Supply voltage, universal | 21.6...253 VAC, 50...60 Hz or 19.2...300 VDC |
| Fuse | 400 mA SB / 250 VAC |
| Internal power dissipation |
≤ 1.5 W (2 channels), 5202A1 and 5202A2
≤ 2.0 W (2 channels), 5202A4 |
| Max. required power |
≤ 1.5 W (2 channels), 5202A1 and 5202A2
≤ 2.0 W (2 channels), 5202A4 |
Isolation voltage |
|
| Isolation voltage, test / working | 3.75 kVAC / 250 VAC |
| PELV/SELV | IEC 61140 |
Auxiliary supplies |
|
| NAMUR supply | 8 VDC / 8 mA |
| EMC immunity influence | < ±0.5% |
| Extended EMC immunity: NAMUR NE21, A criterion, burst | < ±1% |
Input specifications
| Sensor types | NAMUR according to EN 60947-5-6 / mechanical contact |
| Frequency range | 0...5 kHz |
| Pulse length | > 0.1 ms |
| Input resistance | 1 kΩ |
| Trig level, signal | < 1.2 mA, > 2.1 mA |
| Trig level, cable fault | < 0.1 mA, > 6.5 mA |
Output specifications
Relay output |
|
| Max. switching frequency | 20 Hz |
| Max. voltage | 250 VRMS |
| Max. current | 2 AAC |
| Max. AC power | 100 VA |
| Max. load at 24 VDC | 1 A |
NPN outputs |
|
| Max. switching frequency | 5 kHz |
| Min. pulse length | > 0.1 ms |
| Max. load, current / voltage | 80 mA / 30 VDC |
| Voltage drop at 25 mA / 80 mA | < 0.75 VDC / < 2.5 VDC |
Observed authority requirements
| EMC | 2014/30/EU |
| LVD | 2014/35/EU |
| EAC | TR-CU 020/2011 |
Approvals
| UL | UL 508 / C22.2 no. 14 |