Signal calculator
2289
- Two analog inputs
- Multiple functions
- Front-programmable
- 3-digit LED display
- Version with a Pt100 input
- Analog output
Advanced features
- Programmed via the user interface which consists of a 3-digit display and 3 function keys in the front panel.
Application
- Operates as a PID controller with an analog or a Pt100 input.
- Functions include a manual / automatic controller, an analog calculator with a scale function on both inputs, a samplehold transmitter, a peak-hold transmitter, a delay transmitter, a signal limiter, averaging of noisy signals, monitoring of a signal’s slope, or an analog multiplexer.
Technical characteristics
- The A and B inputs can be programmed to receive current signals in the range 0...20 mA (eg. 4...20 mA), or voltage signals in the range 0...10 VDC.
- Input A is a linearized Pt100 with a 3-wire connection. input B is an analog current / voltage input.
- Digital inputs are jumper selectable NPN or PNP.
- Analog standard current / voltage output of 0/4...20 mA / 0/2...10 VDC.
- Both the input signals and the output signal can be inverted.
- Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying. In environments with strong vibrations the PR 7002 can be mounted as an additional safety catch for system 2200 devices on the relay socket.
Ficha técnica y manuales
Documentación complementaria
Declaración UE de conformidad
- 2289DoC_EU_102_UK.pdf
- 2289DoC_EU_101_UK.pdf
- 2289DoC_EU_100_UK.pdf
- Versiones anteriores
- Última versión
Nota de seguridad
Nota de seguridad
- SN2200-1_104_1937.pdf
- SN2200-1_103_1745.pdf
- SN2200-1_102_1613.pdf
- SN2200-1_100_1106.pdf
- Versiones anteriores
- Última versión
Homologaciones y certificados
Declaración EAC
- EAC-Declaration.pdf
- Última versión
Metrology Pattern Approval (MPA), Russia
- MPA_Russia.pdf
- Última versión
Environmental Conditions
| Operating temperature | -20°C to +60°C |
| Calibration temperature | 20...28°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree | IP50 |
Mechanical specifications
| Dimensions (HxWxD) | 80.5 x 35.5 x 84.5 mm (D is without pins) |
| Weight approx. | 130 g |
Common specifications
Supply |
|
| Supply voltage | 19.2...28.8 VDC |
| Max. required power | 2.7 W |
| Internal power dissipation | 2.4 W |
Response time |
|
| Response time | < 60 ms |
| Signal / noise ratio | Min. 60 dB |
| Updating time | 20 ms |
| Signal dynamics, input | 20 bit |
| Signal dynamics, output | 16 bit |
| Proportional band (XP) | 0.01...999% |
| Gain, 1/XP = | 0.1...10000 |
| Integrating time (TI) | 0...999 s |
| Differentiating time (TD) | 0...999 s |
| Effect of supply voltage change | < ±0.002% of span / %V |
| Auxiliary voltages: Reference voltage | 2.5 VDC ±0.5% / 15 mA |
| Temperature coefficient | < ±0.01% of span / °C |
| Linearity error | < 0.1% of span |
| EMC immunity influence | < ±0.5% |
Input specifications
Common input specifications |
|
| Max. offset | 50% of selected max. value |
Current input |
|
| Measurement range | 0...20 mA |
| Min. measurement range (span) | 4 mA |
| Input resistance | Nom. 50 Ω |
Voltage input |
|
| Measurement range | 0...10 VDC |
| Min. measurement range (span) | 200 mV |
| Input resistance | Nom. 10 MΩ |
RTD input |
|
| RTD type | Pt100 (2289B) |
| Cable resistance per wire | 25 Ω (max.) |
| Sensor current | Nom. 1.25 mA |
| NPN, digital input | Pull up 24 VDC / 6.9 mA |
| PNP, digital input | Pull down 0 VDC / 6.9 mA |
| Pulse length | > 50 ms |
Output specifications
Current output |
|
| Signal range | 0...20 mA |
| Min. signal range | 5 mA |
| Load (@ current output) | ≤ 600 Ω |
| Load stability | ≤ 0.01% of span / 100 Ω |
| Current limit | 20.5 mA |
| Voltage output through internal shunt | See manual for details |
| of span | = of the presently selected range |
Observed authority requirements
| EMC | 2014/30/EU |
| RoHS | 2011/65/EU |
| EAC | TR-CU 020/2011 |
7423
Ceramic socket for Pt100 sensor
7430B
Pt100 cable sensor
7430C
Pt100 cable sensor
7440
Thermowell for PR 7400 Pt100 sensor
7002
Spring clip
7007
2-digit digital potentiometer
7008
3-digit digital potentiometer
7009
10-turn potentiometer, 200 Ω7010
10-turn potentiometer, 20 kΩ
7011
Dial for 10-turn potentiometer
7012
1-turn potentiometer, 1 kΩ7015
1-turn potentiometer, 10 kΩ7016
1-turn potentiometer, 100 kΩ
7020
Knob for 1-turn potentiometer
7020A
Knob for 10-turn potentiometer
7023
11-pole relay socket
7024
Code ring and code pin
