Temperature / mA converter

9113A

Temperature / mA converter

Input for RTD, TC and mA
Active / passive mA output via the same two terminals
1 or 2 channels
Can be supplied separately or installed on power rail, PR type 9400
SIL 2-certified via Full Assessment

Overview +
Technical details +
Accessories +

Advanced features

Configuration and monitoring by way of detachable display front (PR 45xx); process calibration and signal simulation.
Copying of the configuration from one device to others of the same type via the display front.
TC inputs can use either the internal CJC or a terminal with a built-in Pt100 sensor (PR 5910, channel 1 / PR 5913, channel 2) for higher accuracy.
Advanced monitoring of internal communication and stored data.
SIL 2 functionality is optional and must be activated in a menu point.

Application

9113Axx can be mounted in the safe area or in zone 2 / Class I, Division 2, Groups A, B, C, D.
Conversion and scaling of temperature (Pt, Ni and TC) and active current signals.
9113A has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508.
Suitable for the use in systems up to Performance Level “d” according to ISO-13849.

Technical characteristics

1 green and 2 red front LEDs indicate operation status and malfunction.
2.6 kVAC galvanic isolation between input, output and supply.

Mounting

The devices can be mounted vertically or horizontally without distance between neighbouring units.

Manuals

Data sheet

9113A.pdf

Safety manual (SIL)

9113_Safety_manualV6R0.pdf

ATEX certificate

IECEx certificate

9113AIEC_issue3.pdf

Declaration of Conformity

Safety note

Modbus configuration manual

PPS manual

4801 Gateway manual

4801_V100_UK.pdf

Brazilian manual

Russian manual

FM certificate

9113_FM19US0059X_FM19CA0032X.pdf

UL certificate

FMEDA report

Assessment report

AssessmentReport_9113_002_V1R4.pdf

EMC data

9000_EMC_data.pdf

EAC declaration

EAC-Declaration.pdf

EAC LVD declaration

EAC_LVD-Declaration.pdf

EAC Ex certificate

EAC_Ex.pdf

Metrology Pattern Approval (MPA)

Environmental Conditions

Operating temperature	-20°C to +60°C
Storage temperature	-20°C to +85°C
Calibration temperature	20...28°C
Relative humidity	< 95% RH (non-cond.)
Protection degree	IP20
Installation in	Pollution degree 2 & meas. / overvoltage cat. II

Mechanical specifications

Dimensions (HxWxD)	109 x 23.5 x 104 mm
Dimensions (HxWxD) w/ 4501/451x	109 x 23.5 x 116 / 131 mm
Weight approx.	250 g
Weight incl. 4501 / 451x (approx.)	265 g / 280 g
DIN rail type	DIN EN 60715/35 mm
Wire size	0.13...2.08 mm² AWG 26...14 stranded wire
Screw terminal torque	0.5 Nm
Vibration	IEC 60068-2-6
2...13.2 Hz	±1 mm
13.2...100 Hz	±0.7 g

Common specifications

Supply
Supply voltage	19.2...31.2 VDC
Fuse	400 mA SB / 250 VAC
Max. required power	≤ 0.8 W/≤ 1.4 W (1 ch./2 ch.)
Max. power dissipation, 1 / 2 ch.	≤ 0.8 W / ≤ 1.4 W
Isolation voltage
Test /working: Input to any	2.6 kVAC / 300 VAC reinforced isolation
Analog output to supply	2.6 kVAC / 300 VAC reinforced isolation
Status relay to supply	1.5 kVAC / 150 VAC reinforced isolation
Response time
Temperature input, programmable (0...90%, 100...10%)	1...60 s
mA / V input (programmable)	0.4...60 s
Programming	PR 45xx
Signal / noise ratio	Min. 60 dB (0...100 kHz)
Signal dynamics, input	24 bit
Signal dynamics, output	16 bit
Accuracy	Better than 0.1% of sel. range
EMC immunity influence	< ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst	< ±1% of span

Input specifications

RTD input
RTD type	Pt10/20/50/100/200/250/300/Pt400/500/1000; Ni50/100/120/1000
Cable resistance per wire	50 Ω (max.)
Sensor current	Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire)	< 0.002 Ω / Ω
Sensor error detection	Programmable ON / OFF
TC input
Thermocouple type	B, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC) via ext. sensor in 5910	20...28°C ≤ ±1°C, -20...20°C / 28...70°C ≤ 2°C
CJC via int. mounted sensor	±(2.0°C + 0.4°C * Δt)
Δt =	Internal temp.-ambient temp.
Sensor error detection	Programmable ON or OFF (only wire breakage)
Sensor error current: When detecting / else	Nom. 2 μA / 0 μA
Current input
Measurement range	0...23 mA
Programmable measurement ranges	0...20 and 4...20 mA
Input resistance	Nom. 20 Ω + PTC 50 Ω
Sensor error detection	Programmable ON / OFF

Output specifications

Current output
Signal range	0...23 mA
Programmable signal ranges	0...20/4...20/20...0/20...4 mA
Load (@ current output)	≤ 600 Ω
Load stability	≤ 0.01% of span / 100 Ω
Sensor error indication	0 / 3.5 / 23 mA / none
NAMUR NE43 Upscale/Downscale	23 mA / 3.5 mA
Output limitation, on 4...20 and 20...4 mA signals	3.8...20.5 mA
Output limitation, on 0...20 and 20...0 mA signals	0...20.5 mA
Current limit	≤ 28 mA
Passive 2-wire mA output
Max. external 2-wire supply	26 VDC
Max. load resistance [Ω]	(Vsupply-3.5)/0.023 A
Effect of external 2-wire supply voltage variation	< 0.005% of span / V
Status relay
Max. voltage	125 VAC / 110 VDC
Max. current	0.5 AAC / 0.3 ADC
Max. AC power	62.5 VA / 32 W
of span	= of the currently selected measurement range

Observed authority requirements

EMC	2014/30/EU
LVD	2014/35/EU
ATEX	2014/34/EU
RoHS	2011/65/EU
EAC	TR-CU 020/2011
EAC Ex	TR-CU 012/2011
EAC LVD	TR-CU 004/2011

Approvals

ATEX	KEMA 07ATEX0148 X
IECEx	KEM 09.0052X
c FM us	FM19US0059X / FM19CA0032X
c UL us, UL 61010-1	E314307
c UL us, UL 913	E233311 (only 9113xx-U9)
EAC Ex	RU C-DK.HA65.B.00355/19
DNV-GL Marine	TAA00000JD
ClassNK	TA18527M
SIL	SIL 2 certified & fully assessed acc. to IEC 61508