Programmable LED indicator

5714

Display for digital readout of current / voltage / resistance / temperature or potentiometer signals.
Process control with 2 potential-free relays and / or analog output.
For local readout in extremely wet atmospheres with a specially designed splash-proof cover.

4-digit LED indicator with 13.8 mm 14-segment characters. Max. display readout -1999...9999 with programmable decimal point and relay ON / OFF indication.
All standard operational parameters can be adjusted to any application by way of the front function keys.
Help texts in eight languages can be selected via a menu item.
PR5714 is available fully-configured according to specifications ready for process control and visualization.
Inputs, outputs, and supply are floating and galvanically separated.
In versions with relay outputs the user can minimize the installation test time by activating / deactivating each relay independently of the input signal.

To be mounted in panel front. The included rubber packing must be mounted between the panel cutout hole and the display front to obtain a protection degree of IP65 (type 4X). For extra protection in extreme environments, PR5714 can be delivered with a specially designed splash-proof cover as accessory.

Operating temperature	-20°C to +60°C
Calibration temperature	20...28°C
Relative humidity	< 95% RH (non-cond.)
Protection degree (mounted in panel)	IP65 / Type 4X

Supply
Supply voltage, universal	21.6...253 VAC, 50...60 Hz or 19.2...300 VDC
Max. required power	2.5 W (5714A) 3.0 W (5714B/C) 3.5 W (5714D)
Internal power dissipation	2.2 W (5714A) 2.7 W (5714B/C) 3.2 W (5714D)
Isolation voltage
Isolation voltage, test / working	2.3 kVAC / 250 VAC
Response time
Temperature input, programmable (0...90%, 100...10%)	1...60 s
mA / V input (programmable)	0.4...60 s
Auxiliary supplies
2-wire supply (pin 46...45)	25...15 VDC / 0...20 mA
Signal / noise ratio	Min. 60 dB (0...100 kHz)
Accuracy	Better than 0.1% of sel. range
EMC immunity influence	< ±0.5% of readout

RTD input
RTD type	Pt10/20/50/100/200/250; Pt300/400/500/1000; Ni50/100/120/1000; Cu10/20/50/100
Cable resistance per wire	50 Ω (max.)
Sensor current	Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire)	< 0.002 Ω / Ω
Linear resistance input
Linear resistance min....max.	0 Ω...10000 Ω
Potentiometer input
Potentiometer min....max.	10 Ω...100 kΩ
TC input
Thermocouple type	B, E, J, K, L, N, R, S, T, U, W3, W5, LR
CJC via int. mounted sensor	±(2.0°C + 0.4°C * Δt)
Δt =	Internal temp.-ambient temp.
Sensor error detection	Yes
Sensor error current: When detecting / else	Nom. 2 μA / 0 μA
Current input
Measurement range	0...23 mA
Programmable measurement ranges	0...20 and 4...20 mA
Input resistance	Nom. 20 Ω + PTC 25 Ω
Sensor error detection	Loop break 4...20 mA
Voltage input
Measurement range	0...12 VDC
Programmable measurement ranges	0/0.2...1; 0/2...10 VDC
Input resistance	Nom. 10 MΩ

Display
Display readout	-1999...9999 (4 digits)
Decimal point	Programmable
Digit height	13.8 mm
Display updating.	2.2 times / s
Input outside input range is indicated by	Explanatory text
Current output
Signal range	0...23 mA
Programmable signal ranges	0...20/4...20/20...0/20...4 mA
Load (@ current output)	≤ 800 Ω
Load stability	≤ 0.01% of span / 100 Ω
Sensor error indication	0 / 3.5 / 23 mA / none
NAMUR NE43 Upscale/Downscale	23 mA / 3.5 mA
Output limitation, on 4...20 and 20...4 mA signals	3.8...20.5 mA
Output limitation, on 0...20 and 20...0 mA signals	0...20.5 mA
Current limit	≤ 28 mA
Relay output
Relay functions	Setpoint
Hysteresis	0...100%
ON and OFF delay	0...3600 s
Sensor error reaction	Break / Make / Hold
Max. voltage	250 VAC / VDC
Max. current	2 A
Max. AC power	500 VA
Max. DC current, resistive load ≤ 30 VDC	2 ADC
Max. DC current, resistive load > 30 VDC	See manual for details