Items 0
9113
 
 

9113B

 

Temperature / mA converter

 

  • Input for RTD, TC and mA
  • Active / passive mA output via the same two terminals
  • 1 or 2 channels
  • Can be supplied separately or installed on power rail, PR type 9400
  • SIL 2-certified via Full Assessment
  1. Overview +

  2. Technical details +

  3. Accessories +


Advanced features

  • Configuration and monitoring by way of detachable display front (PR 4511/4501); process calibration and signal simulation.
  • Copying of the configuration from one device to others of the same type via the display front.
  • TC inputs can use either the internal CJC or a terminal with a built-in Pt100 sensor (PR 5910Ex, channel 1 / PR 5913Ex, channel 2) for higher accuracy.
  • Advanced monitoring of internal communication and stored data.
  • SIL 2 functionality is optional and must be activated in a menu point.

Application

  • The device can be mounted in the safe area and in zone 2 / cl. 1 div. 2 and receive signals from zone 0, 1, 2 and zone 20, 21, 22 including M1 / Class I/II/III, Div. 1, Gr. A-G.
  • Conversion and scaling of temperature (Pt, Ni and TC) and active current signals.
  • The 9113 has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508.

Technical characteristics

  • 1 green and 2 red front LEDs indicate operation status and malfunction.
  • 2.6 kVAC galvanic isolation between input, output and supply.

Mounting

  • The devices can be mounted vertically or horizontally without distance between neighbouring units.

Environmental Conditions

  • Operating temperature

    -20°C to +60°C

  • Storage temperature

    -20°C to +85°C

  • Calibration temperature

    20...28°C

  • Relative humidity

    < 95% RH (non-cond.)

  • Protection degree

    IP20

  • Installation in

    Pollution degree 2 & meas. / overvoltage cat. II

Mechanical specifications

  • Dimensions (HxWxD)

    109 x 23.5 x 104 mm

  • Dimensions (HxWxD) w/ 4501/4511

    109 x 23.5 x 116 / 131 mm

  • Weight approx.

    250 g

  • Weight incl. 4501 / 4511 (approx.)

    265 g / 350 g

  • DIN rail type

    DIN EN 60715/35 mm

  • Wire size

    0.13...2.08 mm2 AWG 26...14 stranded wire

  • Screw terminal torque

    0.5 Nm

  • Vibration

    IEC 60068-2-6

  • 2...13.2 Hz

    ±1 mm

  • 13.2...100 Hz

    ±0.7 g

Common specifications

  • Supply

  • Supply voltage

    19.2...31.2 VDC

  • Fuse

    400 mA SB / 250 VAC

  • Max. required power

    ≤ 0.8 W/≤ 1.4 W (1 ch./2 ch.)

  • Max. power dissipation, 1 / 2 ch.

    ≤ 0.8 W / ≤ 1.4 W

  • Isolation voltage

  • Test /working: Input to any

    2.6 kVAC / 300 VAC reinforced isolation

  • Analog output to supply

    2.6 kVAC / 300 VAC reinforced isolation

  • Status relay to supply

    1.5 kVAC / 150 VAC reinforced isolation

  • Response time

  • Temperature input, programmable (0...90%, 100...10%)

    1...60 s

  • mA / V input (programmable)

    0.4...60 s

  • Programming

    Communication enabler 4511 / Programming front 4501

  • Signal / noise ratio

    Min. 60 dB (0...100 kHz)

  • Signal dynamics, input

    24 bit

  • Signal dynamics, output

    16 bit

  • Accuracy

    Better than 0.1% of sel. range

  • EMC immunity influence

    < ±0.5% of span

  • Extended EMC immunity: NAMUR NE21, A criterion, burst

    < ±1% of span

Input specifications

  • RTD input

  • RTD type

    Pt10/20/50/100/200/250/300/Pt400/500/1000; Ni50/100/120/1000

  • Cable resistance per wire

    50 Ω (max.)

  • Sensor current

    Nom. 0.2 mA

  • Effect of sensor cable resistance (3-/4-wire)

    < 0.002 Ω / Ω

  • Sensor error detection

    Programmable ON / OFF

  • TC input

  • Thermocouple type

    B, E, J, K, L, N, R, S, T, U, W3, W5, LR

  • Cold junction compensation (CJC) via ext. sensor in 5910

    20...28°C ≤ ±1°C, -20...20°C / 28...70°C ≤ 2°C

  • CJC via int. mounted sensor

    ±(2.0°C + 0.4°C * Δt)

  • Δt =

    Internal temp.-ambient temp.

  • Sensor error detection

    Programmable ON or OFF (only wire breakage)

  • Sensor error current: When detecting / else

    Nom. 2 μA / 0 μA

  • Current input

  • Measurement range

    0...23 mA

  • Programmable measurement ranges

    0...20 and 4...20 mA

  • Input resistance

    Nom. 20 Ω + PTC 50 Ω

  • Sensor error detection

    Programmable ON / OFF

Output specifications

  • Current output

  • Signal range

    0...23 mA

  • Programmable signal ranges

    0...20/4...20/20...0/20...4 mA

  • Load (@ current output)

    ≤ 600 Ω

  • Load stability

    ≤ 0.01% of span / 100 Ω

  • Sensor error indication

    0 / 3.5 / 23 mA / none

  • NAMUR NE43 Upscale/Downscale

    23 mA / 3.5 mA

  • Output limitation, on 4...20 and 20...4 mA signals

    3.8...20.5 mA

  • Output limitation, on 0...20 and 20...0 mA signals

    0...20.5 mA

  • Current limit

    ≤ 28 mA

  • Passive 2-wire mA output

  • Max. external 2-wire supply

    26 VDC

  • Max. load resistance [Ω]

    (Vsupply-3.5)/0.023 A

  • Effect of external 2-wire supply voltage variation

    < 0.005% of span / V

  • Status relay

  • Max. voltage

    110 VDC / 125 VAC

  • Max. current

    0.3 ADC / 0.5 AAC

  • Max. AC power

    62.5 VA / 32 W

Observed authority requirements

  • EMC

    2014/30/EU

  • LVD

    2014/35/EU

  • RoHS

    2011/65/EU

  • EAC

    TR-CU 020/2011

Approvals

  • ATEX 2014/34/EU

    KEMA 07ATEX0148 X

  • IECEx

    KEM 09.0052X

  • FM

    3038279-C

  • INMETRO

    DEKRA 16.0003 X

  • UL

    UL 61010-1

  • EAC Ex TR-CU 012/2011

    RU C-DK.GB08.V.00410

  • DNV-GL Marine

    Stand. f. Certific. No. 2.4

  • CCOE

    P337349/3

  • SIL

    SIL 2 certified & fully assessed acc. to IEC 61508

Your request has been sent successfully. - 0 Items on your list
Product description Quantity
Please specify variant(s) (see data sheet) - or indicate ‘Variant unknown’
Your contact information
Continue browsing
No products added
You have no products on your list...

When browsing product pages on this website, you have the possibility to add products to a list - and send your list to us, thereby requesting a quotation.
You add products to the list by clicking the "GET A QUOTE" button on the individual product pages.

When you have submitted the list, we will get back to you as quickly as possible.

If you don't submit the list, it will be visible to you on the website for 7 days (we will place a so-called' cookie on your pc or tablet).

We hope you will find the functionality useful. Go to the product pages to add products to your list.
Thank you for your request for a quotation.
We will get back to you by phone or email as soon as possible.