Accessori
Gamma completa di accessori da abbinare ai dispositivi.
Per ottimizzare le prestazioni dei prodotti, offriamo una vasta gamma di accessori, tra cui: contatori elettromeccanici, interfacce di comunicazione Loop Link, connettori CJC, derivatori resistivi, potenziometri e potenziometri digitali, coperture, fili elettrici, sensori di prossimità induttivi, raccordi guida, fermi, profili e altro ancora.
I nostri accessori sono mostrati di seguito. Se vi occorre assistenza nella selezione della soluzione più adatta, contattateci.
USB HART modem
277
- Easy installation
- USB 1.1 and 2.0 compatible
- Draws power from USB port
Modem HART, Bluetooth Low Energy (BLE)
278
- Bluetooth v4.2
- Wireless communication up to 328 ft. (100m)
- Battery-powered
Electromechanical counter
3400T
- Supply voltage 24 VDC
- 6 digits
- Reset button in the counter front
Loop Link communications interface
5909
- USB connection
- For PReset version 5.0 or higher
Shunt resistor 0.1 Ω
7005
- 0.1 Ω, ±1%, 20 W
- Max. working voltage:
550 Volt - Connection: solder terminals
Shunt resistor 1 Ω
7006
- 1 Ω, ±1%, 20 W
- Max. working voltage:
550 Volt - Connection: solder terminals
2-digit digital potentiometer
7007
- 10 kΩ, ±3%, 2 W
- Connection: solder terminals
3-digit digital potentiometer
7008
- 10 kΩ, ±3%, 2 W
- Connection: solder terminals
10-turn potentiometer, 200 Ω
7009
- 200 Ω, ±5%, 2 W
- Connection: solder terminals
10-turn potentiometer, 20 kΩ
7010
- 20 kΩ, ±5%, 2 W
- Connection: solder terminals
Shunt resistor 0.5 Ω
7014
- 0.5 Ω, ±1%, 20 W
- Max. working voltage:
550 Volt - Connection: solder terminals
1-turn potentiometer, 10 kΩ
7015
- 10 kΩ, ±10%, 2 W
- Connection: solder terminals
1-turn potentiometer, 100 kΩ
7016
- 100 kΩ, ±10%, 2 W
- Connection: solder terminals
Knob for 1-turn potentiometer
7020
- For potentiometers type 7012, 7015 and 7016
Knob for 10-turn potentiometer
7020A
- For potentiometers type 7009, 7010 and 7028
Shunt resistor 0.2 Ω
7029
- 0.2 Ω, ±1%, 20 W
- Max. working voltage:
550 Volt - Connection: solder terminals
Shunt resistor 0.1 Ω for DIN rail mounting
7030
- Max. voltage: 500 V (between ground and terminals)
- Connection: screw terminals
Label sheet with engineering units
7031
- For displays in the 5700 series
- 25 different units
Inductive proximity sensor
8341
- NAMUR DIN 19234
- Switching distance: 5 mm
- Max. frequency: 500 Hz
Inductive proximity sensor
8342
- NAMUR DIN 19234
- Switching distance: 2 mm
- Max. frequency: 800 Hz
Inductive proximity sensor
8343
- NPN
- Switching distance: 5 mm
- Max. frequency: 500 Hz
Inductive proximity sensor
8344
- NPN
- Switching distance: 2 mm
- Max. frequency: 800 Hz
Field enclosure
8501
- Cut-out dimensions fit PR displays
- Protection degree IP65
- Easy mounting on wall or panel
M12 interface cable for 5909 Loop Link
8509
- M12 interface cable for 5909 Loop Link
8 unit 4511 Modbus cable
8510
- For Modbus daisy chain wiring, 8 devices
- Male connector in both ends
3 X RJ45 female Y-splitter
8514
- Modbus line splitter
- One signal in - two signals out
RJ45 female to female shielded cable adabter
8516
- Connection of two male cable lines
- Metal housing
3 x RJ45 female shielded Y-splitter
8517
- Modbus line splitter
- One signal in - two signals out
7501 Blind plug M20, aluminum
8550
- M20 incl. silicone O-ring
- For aluminum housing
7501 Blind plug M20, aluminum
8550-F
- M20 incl. FKM O-ring
- For aluminum housing
7501 Blind plug M20, stainless
8550-S
- M20 incl. silicone O-ring
- For stainless steel housing
7501 Blind plug M20, stainless
8550-SF
- M20 incl. FKM O-ring
- For stainless steel housing
Power rail 15 mm profile
9400_1
- Different lengths
- Mounting and supply of devices in the 3000 and 9000 series
Power rail 7.5 mm profile
9400_2
- Different lengths
- Mounting and supply of devices in the 3000 and 9000 series
Hai trovato utili queste informazioni?
Dai una valutazione
