Valve controller
2224
- Front-programmable
- mA, V, and Ω programmable input
- Ramp times, jump values, reversal, chopper frequency, and deadband
- 3-digit LED display shows I-valve % value
- 1 or 2 channels
Advanced features
- Multifunction user interface consisting of three pushbuttons and a 3-digit LED display.
- All parameters are protected against unauthorized changes with a password.
Application
- Control and regulation of single- or double-coil hydraulic and pneumatic proportional valves used for accurate oil flow regulation, linear soft acceleration and deceleration, modulated output signal, and programmable deadband.
- Is highly suitable for joystick regulation of A/B movements.
- Where changes to A and B need to be selected directly or according to the value of an input signal.
Technical characteristics
- During operation the display shows the present output signal as a % of the I valve.
- Programmable current or voltage input for standard signals acc. to order schedule, joystick / potentiometer or a special non-programmable input.
- Digital inputs for external control functions.
- A pulsating current output prevents the connected valve from sticking.
- Optional programming of the modulation frequency (PWM) between 8 and 400 Hz.
- Multiple adjustable parameters such as output currents, ramp times, jump values, chopper frequency, reversal, deadband, and ON/OFF functions.
- Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.
Scheda tecnica & manuali
Scheda tecnica
- 2224.pdf
- Ultima versione
Manuali
- 2224V104_UK.pdf
- 2224V103_UK.pdf
- 2224V102.pdf
- 2224V101.pdf
- Versione precedente
- Ultima versione
Documentazione supplementare
Dichiarazione UE di conformità
- 2224DoC_EU_102_UK.pdf
- 2224DoC_EU_101_UK.pdf
- 2224DoC_EU_100_UK.pdf
- Versione precedente
- Ultima versione
Dichiarazione UKCA di conformità
- 2224DoC_UKCA_100_UK.pdf
- Ultima versione
Configurazioni predefinite
- PR_default_configurations.pdf
- Ultima versione
Note di sicurezza
Note di sicurezza
- SN2200-1_106_2340.pdf
- SN2200-1_105_2232.pdf
- SN2200-1_104_1937.pdf
- SN2200-1_103_1745.pdf
- SN2200-1_102_1613.pdf
- SN2200-1_101_1506.pdf
- SN2200-1_100_1106.pdf
- Versione precedente
- Ultima versione
Approvazioni & certificati
Dichiarazione EAC
- EAC-Declaration.pdf
- Ultima versione
Metrology Pattern Approval (MPA), Russia
- MPA_Russia.pdf
- Ultima versione
Modulo di ordine
Environmental Conditions
| Operating temperature | -20°C to +60°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree | IP50 |
Mechanical specifications
| Dimensions (HxWxD) | 80.5 x 35.5 x 84.5 mm (D is without pins) |
| Weight approx. | 130 g |
Common specifications
Supply |
|
| Supply voltage (nom. 12 V / 24 V) | 9.6...28.8 VDC |
| Internal power dissipation |
2 W / 24 V
1,8 W / 12 V |
| Programming | Front-programmable |
| Updating time | 30 ms |
| Temperature coefficient | 0.01%/°C |
| Accuracy | Better than 0.2% of selected range |
| Linearity error | 0.2% |
| EMC immunity influence | < 2% of span |
Input specifications
Current input |
|
| Measurement range |
0...20 mA
4...20 mA |
| Input resistance | 50 Ω + PTC (54 Ω) |
Voltage input |
|
| Measurement range | 0/0.2...1 V and 0/2...10 V |
| Input resistance | 10 MΩ |
Potentiometer input |
|
| Potentiometer min....max. | 0...10 V or ±10 V / 10 kΩ |
| Operation / shutdown | PNP / 2.2 kΩ, 12 / 24 V |
| Imax.1 & Imax.2 | PNP / 2.2 kΩ, 12 / 24 V |
| A / B channel | PNP / 2.2 kΩ, 12 / 24 V |
| Deadband | 0...99.9% of input span |
Output specifications
| Output voltage | Supply voltage-0.5 V (max.) |
| Output current | 3000 mA mean |
| Current peak | 7 A |
| Reference voltage |
10 VDC (A valve)
±10 VDC (A & B valve) |
| Ramp up & down | Time 0...10.0 s |
| PWM frequency | 8...400 Hz in steps of 1 Hz |
| of span | = of the presently selected range |
Observed authority requirements
| EMC | 2014/30/EU & UK SI 2016/1091 |
| RoHS | 2011/65/EU & UK SI 2012/3032 |
| EAC | TR-CU 020/2011 |
Need support to select the right product for your application?
Our sales engineers are ready to help specify the right device to meet your needs.
Reach out by phone to get in touch with us straight away – or use the contact form or quick quote function to send your RFQ directly from the website. You’ll get a response within 24 hours on normal business days.
You can expect to get a confirmed delivery date via email within 2 days after we have received your order.
As soon as your package leaves our warehouse, you’ll receive tracking details via email. And if you have any questions along the way we’re just a phone call or email away.
 |
State-of-the-art manufacturing Our 8,500 sqm integrated and automated manufacturing campus in Denmark covers the entire value-chain from design and development to manufacturing. It allows us to design and optimize for testing and manufacturing thereby constantly driving quality up and costs down. |
 |
Dedicated Presale / Aftersales
|
 |
Product reliability |
 |
Product deployment
|
 |
Smart products
Check out our range of communication interfaces
|
