Visit your language specific website?

Loop-powered isolator

 

6185

 

  • 1-, 2- and 4-channel galvanic isolation
  • Slimline channel width of less than 6 mm
  • No separate supply necessary
  • Low response time
  • High noise suppression
Mpa EAC UKCA CE Pr Rohs3 Guarantee
  1. Panoramica + -

  2. Dati tecnici + -

  3. Ordine e consegna + -

  4. Perchè scegliere PR + -

Application

  • Galvanic separation of analog current signals.
  • Elimination of ground loops and measurement of floating signals.
  • A competitive choice in terms of both price and technology for galvanic isolation of current signals to SCADA systems or PLC equipment.
  • Especially useful in applications necessitating an unproblematic transmission of current signals according to NAMUR (sensor error detection).

Technical characteristics

  • PR 6185 is powered by the measured signal and loads the loop with max. 1.8 VDC.
  • The input is protected against overvoltage and polarity error.
  • The drop voltage for each channel can be calculated according to the following expression: Vdrop = 1.8 + (Iout. * Rload.
  • The output is voltage-limited to 15 VDC.
  • Inputs and outputs are floating and galvanically separated.

Mounting / installation

  • Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighboring units, up to 168 channels can be mounted per meter.

Scheda tecnica & manuali


Scheda tecnica

Manuali

Manuali in russo

Documentazione supplementare


Dichiarazione UE di conformità

Dichiarazione UKCA di conformità

Note di sicurezza


Note di sicurezza

Approvazioni & certificati


Dichiarazione EAC

Metrology Pattern Approval (MPA), Russia

Environmental Conditions

Operating temperature -20°C to +60°C
Calibration temperature 20...28°C
Relative humidity < 95% RH (non-cond.)
Protection degree IP20

Mechanical specifications

Dimensions (HxWxD) 109 x 23.5 x 104 mm
Weight approx. 155 / 180 / 230 g (1 / 2 / 4 channels)
DIN rail type DIN 46277
Wire size 1 x 2.5 mm2 stranded wire
Screw terminal torque 0.5 Nm

Common specifications

Supply

Power dissipation, per channel 40 mW

Isolation voltage

Test voltage 2 kVAC

Response time

Response time (0...90%, 100...10%) < 4 ms
Voltage drop < 1.8 VDC, min. 1.8 V + (Iout.*Rload), max.
Signal / noise ratio Min. 60 dB (0...100 kHz)
Accuracy Better than 0.1% of sel. range
EMC immunity influence < ±0.5% of span

Input specifications

Current input

Measurement range 0...23 mA
Input resistance ≈ 90 Ω + Rload (@ 20 mA)

Output specifications

Current output

Signal range 0...23 mA
Min. signal range 1:1
Load (@ current output) ≤ 600 Ω
Load stability < 0.03% of span / 100 Ω
Current limit 50 mA
Voltage limit 15 VDC
of span = of the presently selected range

Observed authority requirements

EMC 2014/30/EU & UK SI 2016/1091
RoHS 2011/65/EU & UK SI 2012/3032
EAC TR-CU 020/2011

 

Need support to select the right product for your application?

Our sales engineers are ready to help specify the right device to meet your needs.

 

Reach out by phone to get in touch with us straight away – or use the contact form or quick quote function to send your RFQ directly from the website. You’ll get a response within 24 hours on normal business days.

 

You can expect to get a confirmed delivery date via email within 2 days after we have received your order.

 

As soon as your package leaves our warehouse, you’ll receive tracking details via email. And if you have any questions along the way we’re just a phone call or email away.

 

State-of-the-art manufacturing

State-of-the-art manufacturing

Our 8,500 sqm integrated and automated manufacturing campus in Denmark covers the entire value-chain from design and development to manufacturing. It allows us to design and optimize for testing and manufacturing thereby constantly driving quality up and costs down.

 

Dedicated Presales / Aftersales

Dedicated Presale / Aftersales
Our more than 80 dedicated sales engineers can help specify the right device for your application. Backed by our 9 subsidiaries and more than 40 dedicated partners, we are directly accessible in more than 40 countries around the world.

 

Find a PR location close to you

 

Product reliability

Product reliability
Although we’d always like to be top of mind, we recognize our job is mainly to provide peace of mind. Install & Forget® is our way of saying that once installed, our devices will continue to perform even in the toughest environments. And we are not afraid to back that statement up with commitments.

 

Product deployment

Product deployment
Our devices are intuitive and simple to configure. Once installed they visualize rich diagnostics data, allowing the operator to plan preventative maintenance, maximizing process up-time.

 

 

Smart products

Smart products
Many of our devices are designed to accommodate current and future communication enablers, providing the operator with multifunctional capabilities that extends into the future.

 

Check out our range of communication interfaces

 

Smart products

 

La vostra richiesta è stata inviata con successo 0 prodotti nella tua lista
I vostri contatti

Informazioni sull'azienda

Inserisci il nome della tua azienda
Inserisci il tuo indirizzo aziendale
Inserisci un Cap valido
Inserisci la città
Selezionare il paese

La tua informazione

Inserisci il tuo nome
Inserisci il tuo cognome
Inserisci un indirizzo di posta elettronica valido
Inserisci un numero di telefono valido. Usa solo numeri.
Inserisci la posizione lavorativa
Leggi e accetta la politica sulla Privacy di PR electronics.
Riceverai una risposta entro 24 ore
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

A mistake has occurred. Please call us instead

Non hai aggiunto alcun prodotto al tuo elenco di preventivi
Durante la visita del nostro sito Web, sarà possibile aggiungere prodotti a un elenco di preventivi semplicemente facendo clic su "Aggiungi all'elenco dei preventivi" nelle singole pagine dei prodotti. Una volta inclusi tutti i prodotti pertinenti, inviaci l'elenco e otterrai un preventivo entro 24 ore. Se non invii l'elenco, sarà accessibile sul sito Web per 21 giorni. Speriamo che troverai utile la funzionalità.
Grazie per aver richiesto un preventivo. Ti risponderemo telefonicamente o via e-mail entro 24 ore.
Contattaci

Se hai bisogno di assistenza, contattaci sarai sempre il benvenuto

Contattaci
Newsletter Icon Red

Registrati qui per ricevere la nostra newsletter

Newsletter Icon Red