The front-operated push buttons are used for programming the different standard functions.
A password can prevent access for changing parameters.
Application
Alarm detector in connection with measurement of AC/DC current or voltage signals.
The unit is used where accurate setpoint setting and different alarm functions are required.
The unit can be used as a single or dual trip amplifier.
Used in applications where programmable parameters such as hysteresis, setpoint, reset, active relay for increasing or decreasing signal, delay and input signal need to be set.
Technical characteristics
3-digit display showing the input signal in %.
Two LED indicating relay status.
3 pushbuttons for programming.
Standard DC current input signals in the range 0...20 mA.
DC voltage signals in the range 0...250 VDC.
AC current signals up to 1 A.
True RMS measurement of AC voltage signals in the range 0...250 VAC.
Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.
La vostra richiesta è stata inviata con successo
- 0 Prodotti nella tua lista
Nessun prodotto aggiunto alla vostra lista…
Nessun prodotto nella vostra lista…
Mentre consultate le pagine sui prodotti presenti sul nostro sito web, avete la possibilità di aggiungere i nostri prodotti alla lista – ed inviarci tale lista per richiedere una quotazione. Per aggiungere i prodotti alla lista, cliccate sul pulsante “RICHIEDI UN PREVENTIVO” presente su ciascuna delle pagine sui prodotti.
Una volta inoltrata la lista, provvederemo a ricontattarvi quanto prima.
Se non desiderate inoltrare tale lista, essa rimarrà comunque visibile alla vostra attenzione sul sito web per 7 giorni (tramite “cookie” sul vostro PC o tablet)
Ci auguriamo troviate utili tali funzionalità. Si prega di andare alle pagine sui prodotti per aggiungere i nostri prodotti alla lista
Grazie per la vostra richiesta
Provvederemo quanto prima a ricontattarvi telefonicamente o via e-mail.