HART 7 temperature converter - isolated
PR 3113
- Excellent accuracy, better than 0.05% of span
- Excellent EMC performance
- Selectable 60 ms / 60 s response time
- Pre-calibrated temperature ranges selectable via DIP switches
- Slimline 6.1 mm housing
Functional highlights
Temperature converter which measures a standard Pt100, TC J and K temperature sensor, and provides an isolated active analog current and HART signal output.
High 3-port isolation provides surge suppression that protects the control system from transients and noise and eliminates ground loops.
All terminals are over-voltage protected, polarity protected and short-circuit protected.
The device can be mounted in Safe area or in Zone 2 / Division 2 areas and is approved for marine applications.
Technical highlights
Flexible 24 VDC (±30%) supply via power rail or connectors.
Excellent conversion accuracy in all available ranges, better than 0.05% of span.
Selectable internal / external CJC.
60 ms fast response time with simultaneous sensor error detection when selected.
Meeting the NAMUR NE21 recommendations, this device ensures top measurement performance in harsh EMC environments.
The device meets the NAMUR NE43 standard defining out of range and sensor error output values.
Excellent signal / noise ratio > 60 dB.
High galvanic isolation of 2.5 kVAC.
A green front LED indicates normal operation, status of the input sensor and malfunction.
Wide ambient temperature range: -25...+70°C.
Programming
Selectable DIP-mode for easy configuration of more than 1000 factory calibrated measurement ranges with HART read only feature.
Selectable HART mode with HART 7 revision protocol enables extended device programming.
Selectable HART-mode to enable full HART read-write capability.
Mounting / installation
The narrow 6.1 mm housing allows up to 163 units per meter.
Units can be mounted side by side, horizontally and vertically, without air gap on a standard DIN rail, even at 70°C ambient temperature.
Units can be supplied separately or installed on PR 9400 power rail.
Data sheet & Manuals
Data sheet
- 3113.pdf
- Latest version
Manuals
- 3113V107_EN.pdf
- 3000V106_UK.pdf
- 3000V105_UK.pdf
- 3000V104_UK.pdf
- 3000V103_UK.pdf
- 3000V102_UK.pdf
- 3000V101_UK.pdf
- 3000V100_UK.pdf
- Previous versions
- Latest version
Manuals in Russian
- 3113V107_RU.pdf
- 3000V106_RU.pdf
- 3000V105_RU.pdf
- 3000V104_RU.pdf
- 3000V103_RU.pdf
- 3000V102_RU.pdf
- Previous versions
- Latest version
Approvals & Certificates
ATEX certificate
- 3113_issue12.pdf
- Latest version
IECEx certificate
- 3113IEC_issue 11.pdf
- Latest version
UKEX certificate
- 3113UKEX_Issue1.pdf
- Latest version
FM certificate
- 3xxx_FM17CA0003X_US0004X.pdf
- 3xxx_FM_3041043_C.pdf
- Previous versions
- Latest version
UL certificate
- UL3101_02_11_12_13_3331_33_37.pdf
- Latest version
DNV marine certificate
- DNV_3xxx_TAA00001RW.pdf
- Latest version
EAC declaration
- EAC_EMC_declaration_Ex_3000_5000_6000_9000.pdf
- Latest version
EAC declaration
- EAC_Ex.pdf
- Latest version
Metrology Pattern Approval (MPA), Russia
- MPA_Russia.pdf
- Latest version
Supplementary documentation
EU Declaration of Conformity
- 3113DoC_EU_105_UK.pdf
- 3113DoC_EU_104_UK.pdf
- 3113DoC_EU_103_UK.pdf
- 3113DoC_EU_102_UK.pdf
- 3113DoC_EU_101_UK.pdf
- 3113DoC_EU_100_UK.pdf
- Previous versions
- Latest version
UKCA Declaration of Conformity
- 3113DoC_UKCA_100_UK.pdf
- Latest version
CCC statement
- 3000_series_CCC_statement.pdf
- Latest version
HART certificate
- 3113_HART_7_Certificate.pdf
- Latest version
EAC LVD declaration
- 3000_EMC_data.pdf
- Latest version
PR default configurations
- PR_default_configurations.pdf
- Latest version
Safety note
Safety note
View variants
Environmental Conditions
| Operating temperature | |
| Storage temperature | |
| Calibration temperature | |