Artiklar 0
5725
 
 

5725

 

Programmable frequency indicator

 

  • Measures NPN, PNP, Contact, NAMUR, S0, Tacho and TTL sensors
  • Programmable frequency input span of 0.001 Hz to 50 kHz
  • The 5725D has two SPDT relays and one analog output
  • Easy to read 4-digit, 14-segment LED display with scrolling help text
  • Universally powered by 21.6…253 VAC or 19.2… 300 VDC
  1. Översikt +

  2. Tekniska data +

  3. Tillbehör +


Application

  • The 5725 measures, scales, and displays frequency signals found in many process speed and flow rate applications.
  • The indicator can measure the period of the frequency, useful for displaying the elapsed time between events.
  • The 5725D has two SPDT setpoint contacts and a 0/4...20 mA output for process control.
  • The installed display provides IP65 environmental sealing, and additional protection is provided by the optional 8335 splash proof cover.

Technical characteristics

  • 4-digit display with 13.8 mm high, 14-segment LED digits and adjustable decimal point.
  • Indicator is scalable from -1999 to 9999.
  • Scrolling help text makes programming easy.
  • Customizable trigger levels allow measurement of nearly any pulse sensor.
  • Built-in excitation source for measuring NPN, PNP, NAMUR and S0 sensors.
  • Fast response time of 1 cycle + 100 ms, and excellent accuracy of better than 0.05% of selected range.
  • The analog output current on the 5725D can be dampened from 0.1 to 60 seconds, and can handle up to 800 Ohms loop load.
  • The 5725 meets NAMUR NE21 recommendations for high performance in harsh EMC environments.
  • High 2.3 kVAC galvanic isolation, and an excellent signal/noise ratio of > 60dB.

Mounting / installation / programming

  • Easy to mount 1/8 DIN (48x96 mm) panel meter with IP65 (type 4X) sealing.
  • Approved for marine applications.
  • Fully push-button programmable.
  • Password-protected.

Environmental Conditions

Operating temperature -20°C to +60°C
Storage temperature -40°C to +85°C
Calibration temperature 20...28°C
Relative humidity < 95% RH (non-cond.)
Protection degree IP20
Protection degree (mounted in panel) IP65 / Type 4X
Installation in Pollution degree 2 & meas. / overvoltage cat. II

Mechanical specifications

Dimensions (HxWxD) 48 x 96 x 120 mm
Cut out dimensions 44.5 x 91.5 mm
Weight approx. 230 g
Wire size, pin 11-12 & 41-44, max. 1 x 1.5 mm2/ AWG 30...16 stranded wire
Wire size, others, max. 1 x 2.5 mm2/ AWG 30...12 stranded wire
Terminal connection Spring-cage
Vibration IEC 60068-2-6
2...13.2 Hz ±1 mm
13.2...100 Hz ±0.7 g

Common specifications

Supply

Supply voltage, universal 21.6...253 VAC, 50...60 Hz or 19.2...300 VDC
Max. required power < 2.8 W (5725A) < 3.6 W (5725D)

Isolation voltage

Isolation voltage, test / working 2.3 kVAC / 250 VAC

Response time

Response time (0...90%, 100...10%) < 1 period + 100 ms
Signal / noise ratio > 60 dB
Accuracy Better than 0.05% of selected range
EMC immunity influence < ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst < ±1% of span

Input specifications

Frequency range, f/I conversion function 0.001 Hz to 50 kHz
Low cut-off frequency 0.0009 Hz (default value)
Max. frequency, with input filter ON 50 Hz
Time range, period time function 999.9 s to 20 μs
Low cut off period time (time-out) 1111 s
Min. period time with input filter ON 20 ms
Input types NAMUR acc. to EN 60947-5-6 Tacho
NPN / PNP
TTL
S0 acc. to DIN 43864
Special voltage
Special current

Output specifications

Display

Display readout -1999...9999 (4 digits)
Decimal point Programmable
Digit height 13.8 mm
Display updating. 2.2 times / s
Display response time, programmable 0.0...60.0 s
Input outside input range is indicated by Explanatory text

Current output

Programmable signal ranges 0...20/4...20/20...0/20...4 mA
Load (@ current output) ≤ 800 Ω
Load stability ≤ 0.01% of span / 100 Ω
Current limit ≤ 28 mA
Sensor error indication 0 / 3.5 / 23 mA / none
Output limitation, on 4...20 and 20...4 mA signals 3.8...20.5 mA
Output limitation, on 0...20 and 20...0 mA signals 0...20.5 mA

Relay output

Relay functions Setpoint
Hysteresis, in % / display counts 0...100% / 0...9999
ON and OFF delay 0...3600 s
Power On delay 0...60 s
Sensor error reaction Break / Make / Hold
Max. voltage 250 VAC / VDC
Max. current 2 A
Max. AC power 500 VA
Max. DC current, resistive load > 30 VDC See manual for details

Observed authority requirements

EMC 2014/30/EU
LVD 2014/35/EU
EAC TR-CU 020/2011

Approvals

DNV-GL Marine Stand. f. Certific. No. 2.4
EU RO MR Type Approval MRA000000Z
UL UL 508 / C22.2 no. 14
 

Är denna information användbar?

 

Betygsätt oss

Din förfrågan har skickats. - 0 Artiklar på din lista
Produktbeskrivning Antal
Vänligen ange artikelnummer och ev. variant (se datablad för mer info) – eller ange “Artikelnummer okänt”
Er kontaktinformation
Bläddra vidare
Inga produkter har lagts till i listan…
Du har inga produkter på listan… När du ser dig omkring bland produkterna på vår hemsida har ni möjlighet att lägga till produkter i en lista och skicka denna lista till oss och därmed begära en offert. Du kan lägga till produkter i listan genom att klicka på ”Få en enkel offert”- knappen på de enskilda produktsidorna. När du har skickat listan kommer vi att återkoppla till dig så snart som möjligt. Om du inte skickar listan kommer den att vara synlig på webbplatsen i 7 dagar (vi kommer att använda oss av ”cookies” på din dator eller surfplatta) Vi hoppas att ni finner denna funktion användbar. Gå till produktsidorna för att lägga till produkter i din lista.
Tack för din förfrågan.
Vi kommer att återkoppla till dig via telefon eller e-mail så snart som möjligt.