2-wire programmable RTD transmitter

Name: 2-wire programmable RTD transmitter 5332A
Rating: 5.0 (1 reviews)

Get a quote within 24 hours

Linearized temperature measurement with Pt100...Pt1000 or Ni100...Ni1000 sensor.
Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors.

Within a few seconds the user can program PR5332A to measure temperatures within all ranges defined by the norms.
Dedicated programmable non-isolated 4-wire RTD transmitter.
RTD and resistance inputs have cable compensation for 2-, 3- and 4-wire connection.
Continuous check of vital stored data for safety reasons.

Operating temperature	-40°C to +85°C
Calibration temperature	20...28°C
Relative humidity	< 95% RH (non-cond.)
Protection degree (encl./terminal)	IP68 / IP00

Supply
Supply voltage	7.2...35 VDC
Internal power dissipation	25 mW…0.8 W
Response time
Response time (programmable)	1...60 s
Voltage drop	7.2 VDC
Warm-up time	5 min.
Programming	Loop Link
Signal / noise ratio	Min. 60 dB
EEprom error check	< 3.5 s
Accuracy	Better than 0.05% of selected range
Signal dynamics, input	20 bit
Signal dynamics, output	16 bit
Effect of supply voltage change	< 0.005% of span / VDC
EMC immunity influence	< ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst	< ±1% of span

Common input specifications
Max. offset	50% of selected max. value
RTD input
RTD type	Pt100, Ni100, lin. R
Cable resistance per wire	5 Ω (max.)
Sensor current	Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire)	< 0.002 Ω / Ω
Sensor error detection	Yes
Linear resistance input
Linear resistance min....max.	0 Ω...5000 Ω

Common output specifications
Updating time	440 ms
Current output
Signal range	4…20 mA
Min. signal range	16 mA
Load (@ current output)	≤ (Vsupply - 7.2) / 0.023 [Ω]
Load stability	≤ 0.01% of span / 100 Ω
Sensor error indication	Programmable 3.5…23 mA
NAMUR NE43 Upscale/Downscale	23 mA / 3.5 mA
of span	= of the presently selected range

ATEX	II 3 G Ex nA [ic] IIC T6...T4 Gc, II 3 G Ex ex [ic] IIC T6...T4 Gc, II 3 D Ex ic IIIC Dc
IECEx	Ex nA [ic] IIC T6…T4 Gc, Ex ec [ic] IIC T6…T4 Gc, Ex ic IIC T6…T4 Gc, Ex ic IIIC Dc