Items 0
 
 

5131A

 

2-wire programmable transmitter

 

  • Input for RTD, TC, mV, linear resistance, mA, and V
  • 3.75 kVAC galvanic isolation
  • 4...20 mA loop output
  • 1- or 2-channel version
  • DIN rail mounting

  1. Overview +

  2. Technical details +

  3. Accessories +

Overview

Advanced features

  • The 5131A transmitter can be configured with the software program PReset using a standard PC and the Loop Link communications unit.

Application

  • Independent channel jumper selectable inputs for current/voltage or temperature.
  • Current input programmable in range 0...100 mA and voltage inputs in range 0...250 VDC.
  • Linearized, electronic temperature measurement with RTD or TC sensor.
  • Conversion of linear resistance variation to a standard analog current / voltage signal, for example from solenoids and butterfly valves or linear movements with attached potentiometer.
  • 4- or 3-wire connection automatic cable compensation or 2-wire connection with programmable cable compensation.
  • Configurable sensor error detection including NAMUR NE43.

Technical characteristics

  • The 2-channel version has full galvanic isolation between the channels.
  • Separation of circuits in PELV/SELV installations.

Data sheet

Russian manual

EAC declaration

Metrology Pattern Approval (MPA)

Environmental Conditions

Operating temperature -20°C to +60°C
Calibration temperature 20...28°C
Relative humidity < 95% RH (non-cond.)
Protection degree IP20

Mechanical specifications

Dimensions (HxWxD) 109 x 23.5 x 130 mm
Weight approx. 195 g
DIN rail type DIN 46277
Wire size 1 x 2.5 mm2 stranded wire
Screw terminal torque 0.5 Nm

Common specifications

Supply
Supply voltage 7.5...35 VDC
Fuse 50 mA SB / 250 VAC

Isolation voltage
Isolation voltage, test / working 3.75 kVAC / 250 VAC
PELV/SELV IEC 61140

Response time
Temperature input, programmable (0...90%, 100...10%) 400 ms...60 s
mA / V input (programmable) 250 ms...60 s
Programming Loop Link
Signal / noise ratio Min. 60 dB (0...100 kHz)
Signal dynamics, input 22 bit
Signal dynamics, output 16 bit
Updating time 115 ms (temperature input) 75 ms (mA / V / mV input)
EMC immunity influence < ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst < ±1% of span
Effect of supply voltage change < 0.005% of span / VDC

Input specifications

Common input specifications
Max. offset 50% of selected max. value

RTD input
RTD type Pt100, Ni100, lin. R
Cable resistance per wire 10 Ω (max.)
Sensor current Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire) < 0.002 Ω / Ω
Sensor error detection Yes

TC input
Thermocouple type B, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC) < ±1.0°C
Sensor error current Nom. 30 μA
Sensor error detection Yes

Current input
Measurement range 0...100 mA
Min. measurement range (span) 4 mA
Input resistance: Supplied unit Nom. 10 Ω + PTC 10 Ω
Input resistance: Non-supplied unit RSHUNT = ∞, VDROP < 6 V

mV input
Measurement range -150...+150 mV

Voltage input
Measurement range 0...250 VDC
Min. measurement range (span) 5 mV
Input resistance Nom. 10 MΩ (≤ 2.5 VDC) Nom. 5 MΩ (> 2.5 VDC)

Output specifications

Current output
Signal range 4…20 mA
Min. signal range 10 mA
Load (@ current output) ≤ (Vsupply -7.5)/0.023 [Ω]
Load stability ≤ 0.01% of span / 100 Ω
Current limit ≤ 28 mA
Sensor error indication Programmable 3.5…23 mA
NAMUR NE43 Upscale/Downscale 23 mA / 3.5 mA
of span = of the presently selected range

Observed authority requirements

EMC 2014/30/EU
LVD 2014/35/EU

Approvals

ATEX DEMKO 99ATEX124572, II (1) GD [EEx ia] IIC
Send product link
Your request has been sent successfully. - 0 Items on your list
Product description Quantity
Please specify variant(s) (see data sheet) - or indicate ‘Variant unknown’
Your contact information
Continue browsing
No products added
You have no products on your list... When browsing product pages on this website, you have the possibility to add products to a list - and send your list to us, thereby requesting a quotation. You add products to the list by clicking the "GET A QUOTE" button on the individual product pages. When you have submitted the list, we will get back to you as quickly as possible. If you don't submit the list, it will be visible to you on the website for 7 days (we will place a so-called' cookie on your pc or tablet). We hope you will find the functionality useful. Go to the product pages to add products to your list.
Thank you for your request for a quotation.
We will get back to you by phone or email as soon as possible.