2289
 

Signal calculator

 

2289

 

  • Two analog inputs
  • Multiple functions
  • Front-programmable
  • 3-digit LED display
  • Version with a Pt100 input
  • Analog output
  1. Overview + -

  2. Technical details + -

  3. Accessories + -


Advanced features

  • Programmed via the user interface which consists of a 3-digit display and 3 function keys in the front panel.

Application

  • Operates as a PID controller with an analog or a Pt100 input.
  • Functions include a manual / automatic controller, an analog calculator with a scale function on both inputs, a samplehold transmitter, a peak-hold transmitter, a delay transmitter, a signal limiter, averaging of noisy signals, monitoring of a signal’s slope, or an analog multiplexer.

Technical characteristics

  • The A and B inputs can be programmed to receive current signals in the range 0...20 mA (eg. 4...20 mA), or voltage signals in the range 0...10 VDC.
  • Input A is a linearized Pt100 with a 3-wire connection. input B is an analog current / voltage input.
  • Digital inputs are jumper selectable NPN or PNP.
  • Analog standard current / voltage output of 0/4...20 mA / 0/2...10 VDC.
  • Both the input signals and the output signal can be inverted.
  • Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying. In environments with strong vibrations the PR 7002 can be mounted as an additional safety catch for system 2200 devices on the relay socket.

Data sheet & Manuals


Data sheet

Manuals

Supplementary documentation


EU Declaration of Conformity

Safety note

Approvals & Certificates


EAC declaration

Metrology Pattern Approval (MPA), Russia

Environmental Conditions

Operating temperature -20°C to +60°C
Calibration temperature 20...28°C
Relative humidity < 95% RH (non-cond.)
Protection degree IP50

Mechanical specifications

Dimensions (HxWxD) 80.5 x 35.5 x 84.5 mm (D is without pins)
Weight approx. 130 g

Common specifications

Supply

Supply voltage 19.2...28.8 VDC
Max. required power 2.7 W
Internal power dissipation 2.4 W

Response time

Response time < 60 ms
Signal / noise ratio Min. 60 dB
Updating time 20 ms
Signal dynamics, input 20 bit
Signal dynamics, output 16 bit
Proportional band (XP) 0.01...999%
Gain, 1/XP = 0.1...10000
Integrating time (TI) 0...999 s
Differentiating time (TD) 0...999 s
Effect of supply voltage change < ±0.002% of span / %V
Auxiliary voltages: Reference voltage 2.5 VDC ±0.5% / 15 mA
Temperature coefficient < ±0.01% of span / °C
Linearity error < 0.1% of span
EMC immunity influence < ±0.5%

Input specifications

Common input specifications

Max. offset 50% of selected max. value

Current input

Measurement range 0...20 mA
Min. measurement range (span) 4 mA
Input resistance Nom. 50 Ω

Voltage input

Measurement range 0...10 VDC
Min. measurement range (span) 200 mV
Input resistance Nom. 10 MΩ

RTD input

RTD type Pt100 (2289B)
Cable resistance per wire 25 Ω (max.)
Sensor current Nom. 1.25 mA
NPN, digital input Pull up 24 VDC / 6.9 mA
PNP, digital input Pull down 0 VDC / 6.9 mA
Pulse length > 50 ms

Output specifications

Current output

Signal range 0...20 mA
Min. signal range 5 mA
Load (@ current output) ≤ 600 Ω
Load stability ≤ 0.01% of span / 100 Ω
Current limit 20.5 mA
Voltage output through internal shunt See manual for details
of span = of the presently selected range

Observed authority requirements

EMC 2014/30/EU
RoHS 2011/65/EU
EAC TR-CU 020/2011
 

Is this information helpful?

 

Rate us

Your request has been sent successfully. 0 items on your list
Your contact information
Please insert your last name
Please insert your last name
Please insert a valid email address
Please insert a valid phone number. Use only numbers.
Please insert your job title
Please insert your company name.
Please insert your company address
Please insert a valid zip code
Please insert a city
Please select country
Please read and agree with PR electronics’ Privacy Policy.
You have not added any products to your quote list
When browsing the website, you can add products to a quote list by simply clicking “Add to quote list" on the individual product pages. Once all relevant products are included, send the list to us and you will get a quotation within 24 hours. If you don't submit the list, it will be accessible on the website for 21 days. We hope you will find the functionality useful.
Thank you for requesting a quotation. We will get back to you by phone or email within 24 hours.

Need help?

If you need support, you are always welcome to contact us

Stay updated!

Register here to receive our newsletter